D1521

Fujitsu Siemens D1521 Motherboard

Specification

Graphics

BIOS Listing

Motherboard Manual

Specification

mPGA478 Socket Intel® Pentium® 4
Intel® 845GE Chipset
400/533MHz FSB
2 DIMM Slots (DDRAM)
- 184 pin, 2.5V, 64 bit, DDR PC333
- Max memory 2GB
- No ECC Support
Integrated i845GE 2D / 3D Video Controller
Integrated i845GE and AD1981 AC97 Audio Codec
- 1 x Line In
- 1 x Line Out
- 1 x Microphone
S/PDIF
ATA 100 IDE Controller
3 x PCI Slots (32bit)
1 x AGP Slot
2 x USB ports (USB 2.0)
Integrated i82562ET LAN Controller
- WOL Support

Graphics

D1521 System Board

Connectors on D1521 System Board

Board Layout

1 = Power Supply
2 = Floppy Disk Drive
3 = IDE Drives 3/4
4 = Power Supply Monitoring
5 = Front Panel
6 = Switch
7 = IDE Drives 1/2
8 = CMOS Battery
9 = Fan 2
10 = PowerOn LED II
11 = Intrusion
12 = LCD Status Indicator
13 = USB C/D
14 = USB E/F
15 = Serial Interface 2
16 = S/PDIF Connector
17 = Audio Front Panel
18 = CD Audio InI
19 = Processor Power Supply
20 = Fan 1

BIOS Listing

<F1> Info
-/+ Select item / Change Values
F9 Setup Defaults
Esc Exit
Enter Select Menu / Execute Command
F7 Previous Values

Main


		Normal Settings	Alternative Settings
System Time:		HH:MM:SS
System Date		MM:DD:YY
Diskette A:		1.4M	None 360K 1.2M 720K
IDE Drive 1:		SAMSUNG SC-148P(PM)
IDE Drive 2:		None
IDE Drive 3:		None
IDE Drive 4:		None
Boot Options	POST Errors	Halt On All Errors	No Halt On Any Errors
	Fast Boot	Enabled	Disabled
	Quiet Boot	Enabled	Disabled
	Primary Display	AGP VGA	PCI VGA
	Boot Menu	Enabled	Disabled
Boot Sequence		ATAPI CD-ROM Drive
		Diskette
		Hard Drive
		Legacy LAN
Base Memory		640k
Extended Memory		246m

Advanced


		Normal Settings	Alternative Settings
Peripheral Configuration	Serial 1	Auto	Enabled Disabled
	Serial 2	Auto	Enabled Disabled
	Parallel	Auto	Enabled Disabled
	Parallel Mode	ECP	Bi Directional Printer EPP ECP
	Diskette Controller	Enabled	Disabled
	Mouse Controller	Auto Detect	Disabled Enabled
	LAN Controller	Enabled	Disabled
	LAN Remote Boot	Disabled	Enabled
	Audio Controller	Auto	Disabled Enabled
PCI Configuration	PCI IRQ Line 1:	Auto	Disabled IRQ 3 IRQ 4 IRQ 5 IRQ 6 IRQ 7 IRQ 9 IRQ 10 IRQ 11 IRQ 12 IRQ 14 IRQ 15
	PCI IRQ Line 2:	Auto
	PCI IRQ Line 3:	Auto
	PCI IRQ Line 4:	Auto
	PCI IRQ Line 5:	Auto
	PCI IRQ Line 6:	Auto
	PCI IRQ Line 7:	Auto
	PCI IRQ Line 8:	Auto
Advanced System Configuration	PCI Bus Parity Checking	Disabled	Enabled
	Graphics Aperature	64MB	32,128,256MB
	USB Host Controller	Enabled	Disabled
	USB 2.0 Host Controller	Enabled	Disabled
	USB Legacy Support	Disabled	Enabled
	BIOS workspace location	Expansion ROM area	Top of base memory
Power On/Off	Power Off Source
	Software	Enabled	Disabled
	Keyboard	Disabled	Enabled
	Power Button	Enabled	Disabled
	Power On Source	Bios controlled	ACPI controlled
	LAN	Enabled	Disabled
	Timer	Enabled	Disabled
	Power Failure Recovery	Previous State	Always Off, Always On, Disabled
System Managment	Fan Control	Auto
	SM Error Halt	disabled
Fan State:	CPU	None
	Auxilliary	None
	Power Supply	Ok
Temp:	CPU	Ok
	System	Ok
:	Battery State	Ok
Reset Configuration Data		No	Yes
Lock Setup Configuration		No	Yes

Security


	Normal Settings	Alternative Settings
Setup Password	Not installed
System Password	Not installed
Set setup password	Press enter
Setup password lock	Standard	Extended
Set system password	Press enter
System password mode	System	keyboard
System load	Standard	Diskette / CD rom lock
Setup prompt	Enabled	Disabled
Virus warning	Disabled	Enabled
Diskette write	Enabled	Disabled
Flash write	Enabled	Disabled
Memorybird System Lock	Disabled	Enabled
Smartcard systemlock	Disabled	Enabled
Cabinet Monitoring	Disabled	Enabled
Hard Disk security :
Hard disk security	Disabled	Enabled
HDD 1 Security State	Not installed

Power


	Normal Settings	Alternative Settings
APM	Enabled	Disabled
Power Management Mode	Customized	Disabled Maximum Power Savings Maximum Performance
Standby Timeout	15 min	Disabled 2 min 5 min 10 min 30 min
Suspend Timeout	Disabled	2 min 15 min 30 min 1 h 2 h
Hard Disk Timeout	15 Min	Disabled 2 min 5 min 10 min
Resume On Time	Off
Resume Time	hh:mm:ss
ACPI S3	Enabled	Disabled

Exit



Save Changes and exit
Discard Changes and exit
Get Default Values
Load Previous Values
Save Changes